Linux kernel memory over-read in iSCSI ISID parsing
- Exploited
- No known exploitation
- Fix
- No fix listed
- Who is exposed
- Not reported
Summary
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Verify the iSCSI ISID is null-terminated
iscsi_parse_pr_out_transport_id() returns the ISID of a FORMAT CODE 01b TransportID as a pointer into the PERSISTENT RESERVE OUT parameter list, lowercased in place and never null-terminated. spc4r37 Table 508 requires the field to be null-terminated, but a non-conforming initiator can omit the NULL; when the ISID ends at the end of the received buffer, the pointer is not a C string.
The registration code still consumes it as one: strcmp() in __core_scsi3_locate_pr_reg() and in the REGISTER AND MOVE path, and snprintf("%s") in __core_scsi3_do_alloc_registration(), which also reads its first 8 bytes unconditionally with get_unaligned_be64() - a NUL check does not bound that read.
When the parameter list spans more than one page, transport_kmap_data_sg() maps it with vmap(), and the over-read walks off the end of the mapping into the vmalloc() guard page and oopses. Reproduced with a PR OUT REGISTER + SPEC_I_PT parameter list of exactly 8192 bytes whose final TransportID carries a 12-byte ISID without a terminating NUL:
BUG: unable to handle page fault for address: ffffc9000138c000 RIP: 0010:strcmp+0xc/0x30 Call Trace: __core_scsi3_locate_pr_reg+0xd3/0x120 [target_core_mod] core_scsi3_decode_spec_i_port+0x8fc/0x13a0 [target_core_mod] core_scsi3_emulate_pro_register+0x73c/0x900 [target_core_mod] ... iscsi_target_rx_thread+0xef/0x1d0 [iscsi_target_mod]
With a single-page parameter list the buffer is a kmap() direct mapping, so the over-read continues into the physically adjacent page instead of faulting. snprintf("%s") then copies whatever follows the ISID in memory into pr_reg_isid, and PR IN READ FULL STATUS reports the registration back to any initiator, turning the over-read into an info leak of kernel heap contents. Reproduced with a 4096-byte parameter list whose last TransportID ends at the end of the buffer with a 4-byte ISID and no NUL, interleaved with I/O to populate adjacent pages: the READ FULL STATUS response returned the ISID as "0xleak" followed by raw bytes that were not part of the parameter list. The snprintf() into pr_reg_isid[PR_REG_ISID_LEN] caps the echoed ISID at 15 characters, so at most 11 bytes past the buffer are leaked per command, but the PR OUT command is not rate limited.
Any initiator that can send PR OUT to an iSCSI-exported LUN can trigger either variant, including a guest via vhost-scsi.
Require 8 bytes to remain after the ",i,0x" separator, and a NUL inside the rest of the descriptor, before the ISID pointer is returned. REGISTER AND MOVE fails with TCM_INVALID_PARAMETER_LIST; on SPEC_I_PT no target port claims the malformed TransportID, and the command fails the same way.
What to do
Check your systems with an agent
Paste this into a coding or ops agent. It checks your systems read-only and reports a table per asset.
Check whether my systems are affected by CVE-2026-99754 (scsi: target: Verify the iSCSI ISID is null-terminated), using the cve.now data below.
Rules: work read-only. Do not run exploit code, proof-of-concept scripts or scanners that send attack payloads, and do not change any configuration, package, image or deployment. Report findings only.
What cve.now has for CVE-2026-99754 (entry last updated 2026-11-20):
Affected:
- Linux Linux: version range not reported
- Linux Linux: versions 2.6.38
Fixed versions: none listed yet.
Setup: unknown whether the bug needs a non-default feature or setting. Check the advisory.
CISA KEV: CVE-2026-99754 is not listed as of cve.now's last read.
This KEV status is for CVE-2026-99754 only. If you also check another CVE, look up its own KEV status; never assume it from this one.
How to check:
- Installed software: check what is actually running, not what a repo declares. Read the version from each host, container image and Kubernetes node (the binary's version output, the OS package database, image layers), and check whether the conditions above hold there. Distribution packages may carry a backported fix under an older version number; confirm against the distribution's own advisory.
Verify against the linked advisories before concluding, and cite the date you read each one:
- https://git.kernel.org/stable/c/29c5ce6465b5696fbdf8126fcd0a6946b005c8b7
- https://git.kernel.org/stable/c/8a71f25a34439e99e094fabb619f787d15aaf9ae
- https://git.kernel.org/stable/c/d1db24c32bbe7b998573392070c3a6bdd9f4066c
- https://git.kernel.org/stable/c/cdf4b87a18cb6a0ee26865cb1b7b5660a491d302
Do not conclude an asset is unaffected unless you checked it and the evidence covers both its version and the conditions above. If you could not check something, mark it unknown and say what is missing.
Report a table with one row per asset and these columns: Asset | Version or build | Status (affected, fixed, not applicable, unknown) | Compensating controls | Exposure (internet-facing, internal, none) | Evidence | Next action.
Entry: https://cve.now/CVE-2026-99754
For follow-up questions, use the cve.now MCP server at https://mcp.cve.now/mcp (no authentication), for example execute with name cve.get and arguments {"id": "CVE-2026-99754"}.Affected versions
- Linux LinuxVersion range not reported
- Linux Linux2.6.38
cve.now Index
- Exploitation?/40Unknown. No CISA SSVC exploitation rating yet
- Exposure?/25Unknown. No advisory context yet
- Reach20/20Affects Linux kernel (software on nearly every server, desktop or phone)
- Severity?/10Unknown. No CVSS score or vendor rating
- No patch5/5No patch listed yet
What would change the score
- Would score about 80 if added to CISA KEV
- Would score about 75 if CISA's SSVC rates exploitation active
- Would score about 47 if advisories confirm default setups are exposed
Timeline
- CVE published
- First seen by cve.now
Evidence 6
| Kind | Source |
|---|---|
| CVE record 2Establishes: The identifier and description. | |
| Record | CVE List · CVE-2026-99754 |
| Record | NVD · CVE-2026-99754 |
| Other links 4 | |
| Link | git.kernel.org · stable/c/29c5ce6465b5696fbdf8126fcd0a6946b005c8b7 |
| Link | git.kernel.org · stable/c/8a71f25a34439e99e094fabb619f787d15aaf9ae |
| Link | git.kernel.org · stable/c/d1db24c32bbe7b998573392070c3a6bdd9f4066c |
| Link | git.kernel.org · stable/c/cdf4b87a18cb6a0ee26865cb1b7b5660a491d302 |
Questions about CVE-2026-99754
Is CVE-2026-99754 being exploited?
It is not in CISA's Known Exploited Vulnerabilities catalog, and CISA's SSVC assessment does not mark exploitation as active. That does not mean it has not been attacked: vendors and researchers can report attacks before CISA lists them. No public exploit code is tracked.
Source: cve.now feed data
Which versions are affected by CVE-2026-99754?
Linux: version 2.6.38.
Source: cve.now feed data
Related
- CVE-2026-99804io_uring/io-wq: save worker type before dropping its reference
- CVE-2026-99803io_uring/net: mask socket type with SOCK_TYPE_MASK in io_socket_bpf_populate()
- CVE-2026-99802io_uring/register: enforce per-task restrictions in io_uring_register_blind()
- CVE-2026-99801io_uring/bpf-ops: clear bpf_ctx while submitting SQEs
- CVE-2026-99800io_uring: free the task context after a grace period
- CVE-2026-99799io_uring/sqpoll: don't wait for the thread to exit
No corrections so far. Something wrong on this page? Report an error.