Skip to main content
Menu
CVEs

Linux kernel out-of-bounds access in usx2y USB audio driver

CVE-2026-99609Published November 20, 2026, updated

Exploited
No known exploitation
Fix
No fix listed
Who is exposed
Not reported

Summary

In the Linux kernel, the following vulnerability has been resolved:

ALSA: usx2y: Require a buffer of two URBs

usx2y_urb_capt_retire() wraps the ring buffer once per packet and usx2y_urb_play_prepare() once per URB of nr_of_packs() packets of up to 50 frames. Both assume that the data fits in the buffer, and the hw constraints only require about two 1 ms periods, so a packet larger than the buffer on capture, or a URB larger than the buffer on playback, violates that assumption.

Constrain SNDRV_PCM_HW_PARAM_BUFFER_SIZE in snd_usx2y_pcm_open() to at least two URBs, 2 * nr_of_packs() * 50 frames, for both directions. The bound is in frames and derived from the driver's own packet limit, so it does not read the endpoint, whose altsetting is only selected in prepare. Two URBs rather than one, because the position advances by a URB on playback and only moves when a URB is less than the whole buffer. Keep a guard in usx2y_urb_capt_retire() that drops a packet larger than the buffer, for the case the constraint makes unreachable.

With nrpacks above about 163 (S16_LE) or 109 (S24_3LE) the bound exceeds the 64 KiB buffer the substream preallocates (twice that with the preallocation raised to its 128 KiB maximum), so hw_params fails for those module settings. That is intended: the driver cannot be safe with a URB larger than half the largest buffer.

Reproduced on 7.3-rc7 with a USB/IP device presenting the US-122 interface layout and 1024-byte packets into a 512-byte capture buffer:

BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x1285/0x1ac0 Read of size 18446744073709551104 at addr ffff88800e448800 by task vhci_rx/83

Tested on 7.3-rc7 with the same device, S16_LE at 44100 Hz, nrpacks 4, so the bound is 400 frames. A 128-frame capture buffer and a 200-frame playback buffer are refused at hw_params with EINVAL. A 400-frame buffer streams for 30 s in each direction with the position advancing inside the buffer and no KASAN report; the capture guard did not fire. The same 400-frame capture buffer with S24_3LE, which selects altsetting 2 in prepare, streams for 30 s with the same result.

What to do

Check your systems with an agent

Paste this into a coding or ops agent. It checks your systems read-only and reports a table per asset.

Check whether my systems are affected by CVE-2026-99609 (ALSA: usx2y: Require a buffer of two URBs), using the cve.now data below.

Rules: work read-only. Do not run exploit code, proof-of-concept scripts or scanners that send attack payloads, and do not change any configuration, package, image or deployment. Report findings only.

What cve.now has for CVE-2026-99609 (entry last updated 2026-11-20):
Affected:
- Linux Linux: version range not reported
- Linux Linux: versions 2.6.12
Fixed versions: none listed yet.
Setup: unknown whether the bug needs a non-default feature or setting. Check the advisory.
CISA KEV: CVE-2026-99609 is not listed as of cve.now's last read.
This KEV status is for CVE-2026-99609 only. If you also check another CVE, look up its own KEV status; never assume it from this one.

How to check:
- Installed software: check what is actually running, not what a repo declares. Read the version from each host, container image and Kubernetes node (the binary's version output, the OS package database, image layers), and check whether the conditions above hold there. Distribution packages may carry a backported fix under an older version number; confirm against the distribution's own advisory.

Verify against the linked advisories before concluding, and cite the date you read each one:
- https://git.kernel.org/stable/c/44c6971a79efdb46cd5c9f492f0ad65aafe05add
- https://git.kernel.org/stable/c/5356d89f5e581dc207c7a607fe585d3e1cb2471c
- https://git.kernel.org/stable/c/824fdf771cb7cbe9ae50eaec588eaf1acee6da94
- https://git.kernel.org/stable/c/4cbb826b3b36df6c275454287ba1df4564a5370b
Do not conclude an asset is unaffected unless you checked it and the evidence covers both its version and the conditions above. If you could not check something, mark it unknown and say what is missing.

Report a table with one row per asset and these columns: Asset | Version or build | Status (affected, fixed, not applicable, unknown) | Compensating controls | Exposure (internet-facing, internal, none) | Evidence | Next action.

Entry: https://cve.now/CVE-2026-99609
For follow-up questions, use the cve.now MCP server at https://mcp.cve.now/mcp (no authentication), for example execute with name cve.get and arguments {"id": "CVE-2026-99609"}.

Affected versions

cve.now Index

25Pof 100 · provisional · methodology v3
  • Exploitation?/40Unknown. No CISA SSVC exploitation rating yet
  • Exposure?/25Unknown. No advisory context yet
  • Reach20/20Affects Linux kernel (software on nearly every server, desktop or phone)
  • Severity?/10Unknown. No CVSS score or vendor rating
  • No patch5/5No patch listed yet

What would change the score

  • Would score about 80 if added to CISA KEV
  • Would score about 75 if CISA's SSVC rates exploitation active
  • Would score about 47 if advisories confirm default setups are exposed

Timeline

  1. CVE published
  2. First seen by cve.now

Evidence 6

Questions about CVE-2026-99609

Is CVE-2026-99609 being exploited?

It is not in CISA's Known Exploited Vulnerabilities catalog, and CISA's SSVC assessment does not mark exploitation as active. That does not mean it has not been attacked: vendors and researchers can report attacks before CISA lists them. No public exploit code is tracked.

Source: cve.now feed data

Which versions are affected by CVE-2026-99609?

Linux: version 2.6.12.

Source: cve.now feed data

No corrections so far. Something wrong on this page? Report an error.