- Exploited
- No known exploitation
- Fix
- No fix listed
- Who is exposed
- Not reported
- Last modified
- Whether it needs action now or is a reference record, by fixed rules, with why. Last checked is when cve.now last re-read it.What do these mean? →
- Reference
- Last checked
- FIRST's estimate of the chance attackers exploit it in the next 30 days, updated daily.What do these mean? →
- 0.21% · 11th percentile
- A 0-100 score for how much a CVE matters across the industry: exploitation, exposure, how widely the software is used, severity and whether a fix exists.What do these mean? →
- 25/100 · provisional
- Whether working attack code is public (Exploit-DB, Metasploit, Nuclei or GitHub). Public code makes attacks easier.What do these mean? →
- None on Exploit-DB, Metasploit or GitHub
Summary
In the Linux kernel's libceph component, a short monitor command acknowledgment is decoded past the bytes actually received, so the kernel can read four bytes of uninitialized or stale memory. Through the rbd driver's write path, that value can trigger a kernel page fault and crash the system.
Written by anthropic/claude-haiku-5.5 from the sources below. Verify against them.
Original description
In the Linux kernel, the following vulnerability has been resolved:
libceph: bound mon_command ack decode to front len
handle_command_ack() bounds the decode with msg->front_alloc_len, the size of the reply buffer, instead of msg->front.iov_len, the number of bytes the monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to get_generic_reply(), which returns the preallocated ->reply of whichever generic request carries the same tid, so the buffer keeps its fixed size however short the reply is. An ack with hdr.front_len below sizeof(struct ceph_mon_request_header) + sizeof(u32), including 0, still passes ceph_decode_need(), and ceph_decode_32() returns four bytes that were never received: uninitialized slab memory, stale bytes of an earlier message, or bytes the peer planted by sending a reply that lands in the same buffer and is then rejected. The read stays within the allocation, so KASAN does not flag it.
req->result reaches userspace through ceph_monc_do_statfs(), ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes it to ERR_PTR() unchecked, which faults:
rbd: failed to get latest osdmap: -186318427 BUG: unable to handle page fault for address: fffffbfffe9ca034 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105) Call Trace: ... kernfs_fop_write_iter (fs/kernfs/file.c:345) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception
Use msg->front.iov_len, matching handle_subscribe_ack(), handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply(). A well-formed ack has front.iov_len >= 22 and is unaffected; a short one takes the existing bad: path. This applies commit d3c32939fa0e ("libceph: bound get_version reply decode to front len") to the last decode-side use of front_alloc_len in this file.
cve.now Index
- Exploitation?/40Unknown. No CISA SSVC exploitation rating yet
- Exposure?/25Unknown. No advisory context yet
- Reach20/20Affects Linux kernel (software on nearly every server, desktop or phone)
- Severity?/10Unknown. No CVSS score or vendor rating
- No patch5/5No patch listed yet
What would change the score
- Would score about 80 if added to CISA KEV
- Would score about 75 if CISA's SSVC rates exploitation active
- Would score about 47 if advisories confirm default setups are exposed
Check your systems with an agent
Paste this into a coding or ops agent. It checks your systems read-only and reports a table per asset.
Check whether my systems are affected by CVE-2026-99296 (libceph: bound mon_command ack decode to front len), using the cve.now data below.
Rules: work read-only. Do not run exploit code, proof-of-concept scripts or scanners that send attack payloads, and do not change any configuration, package, image or deployment. Report findings only.
What cve.now has for CVE-2026-99296 (entry last updated 2026-11-16):
Affected:
- Linux Linux: version range not reported
- Linux Linux: versions 4.9
Fixed versions: none listed yet.
Setup: unknown whether the bug needs a non-default feature or setting. Check the advisory.
CISA KEV: CVE-2026-99296 is not listed as of cve.now's last read.
This KEV status is for CVE-2026-99296 only. If you also check another CVE, look up its own KEV status; never assume it from this one.
How to check:
- Installed software: check what is actually running, not what a repo declares. Read the version from each host, container image and Kubernetes node (the binary's version output, the OS package database, image layers), and check whether the conditions above hold there. Distribution packages may carry a backported fix under an older version number; confirm against the distribution's own advisory.
Verify against the linked advisories before concluding, and cite the date you read each one:
- https://git.kernel.org/stable/c/c6696ac94c8c3ad79a9fa57fc334af2dc1a1f72e
- https://git.kernel.org/stable/c/04a04953b4828bfd8efd4ea3e7e9ad7dac5b083b
- https://git.kernel.org/stable/c/be9fa57665efae4060d17ab21675c1c033d54a80
- https://git.kernel.org/stable/c/62b41a16d8603d4d809fda212f15c3e9c783a82b
Do not conclude an asset is unaffected unless you checked it and the evidence covers both its version and the conditions above. If you could not check something, mark it unknown and say what is missing.
Report a table with one row per asset and these columns: Asset | Version or build | Status (affected, fixed, not applicable, unknown) | Compensating controls | Exposure (internet-facing, internal, none) | Evidence | Next action.
Entry: https://cve.now/CVE-2026-99296
For follow-up questions, use the cve.now MCP server at https://mcp.cve.now/mcp (no authentication), for example execute with name cve.get and arguments {"id": "CVE-2026-99296"}.Timeline
- CVE published
- First seen by cve.now
Affected versions
- Linux Linux
Version range not reported
- Linux Linux
4.9
Evidence 6
CVE record · 2
Establishes: The identifier and description.
- Record
- Record
Corrections
None so far.
Something wrong on this page? Report an error. Every fix is listed here.
Questions about CVE-2026-99296
Is CVE-2026-99296 being exploited?
It is not in CISA's Known Exploited Vulnerabilities catalog, and CISA's SSVC assessment does not mark exploitation as active. That does not mean it has not been attacked: vendors and researchers can report attacks before CISA lists them. No public exploit code is tracked.Source: cve.now feed data
Which versions are affected by CVE-2026-99296?
Linux: version 4.9.Source: cve.now feed data