Zephyr denial of service in IPv6 Router Advertisement handling
- Exploited
- No known exploitation
- Fix
- Fixed in 4.3.2, 4.5.0
- Who is exposed
- Not reported
Summary
Zephyr's IPv6 Neighbor Discovery code can enter an infinite loop when it receives a Router Advertisement that omits the source link-layer address option. An attacker on the same network segment can send that packet without logging in or any user action, causing a permanent denial of service that blocks all IPv6 transmission.
Written by a model
Original description
The IPv6 Neighbor Discovery code in subsys/net/ip/ipv6_nbr.c flushes a neighbour's queued packets at the end of handle_ra_input(). The Source Link-Layer Address Option (SLLAO) is optional in a Router Advertisement; when it is absent, handle_ra_input() still obtains (or creates) a neighbour cache entry for the RA source via net_ipv6_nbr_add() with a NULL link-layer address, so the entry stays in NET_IPV6_NBR_STATE_INCOMPLETE with nbr->idx == NET_NBR_LLADDR_UNKNOWN. The pending-packet drain loop was entered unconditionally for that unresolved entry.
Each net_send_data() in the drain loop runs synchronously into net_ipv6_prepare_for_send(), which finds the neighbour still unresolved and hands the packet to net_ipv6_send_ns(), which puts it straight back onto the same pending_queue. The loop therefore never sees an empty queue. With a single queued packet it transmits a fresh Neighbor Solicitation on every iteration; with two or more queued packets it rotates the queue with no allocation and no transmission at all. The loop runs in the network RX thread with the global IPv6 neighbour mutex held.
An unauthenticated attacker on the same link can trigger this deterministically: advertise itself as a router, induce the victim to queue off-link traffic toward that router (for example by sending echo requests with an off-link source address) while leaving the solicitation unanswered, then send a second Router Advertisement without an SLLAO option. Spoofing an SLLAO-less RA from the legitimate router's link-local address has the same effect whenever traffic is queued for it. Router Advertisements are processed with no authentication whenever CONFIG_NET_IPV6_ND is enabled, which is the default for IPv6-capable builds.
The result is a permanent denial of service: the RX thread spins forever holding the neighbour lock, so all IPv6 transmission and every other user of the neighbour cache blocks, and the Neighbor Advertisement that would resolve the entry can no longer be processed. The ipv6_ns_reply_timer work item that would normally drop the pending packets also blocks on the same mutex. In the single-packet variant the loop additionally floods the link with Neighbor Solicitations. The fix restricts the flush to resolved entries (nbr->idx != NET_NBR_LLADDR_UNKNOWN), leaving the packets queued for the NS reply timeout. There is no memory-safety impact.
What to do
Upgrade to a fixed version: 4.3.2, 4.5.0.
Check your systems with an agent
Paste this into a coding or ops agent. It checks your systems read-only and reports a table per asset.
Check whether my systems are affected by CVE-2026-95824 (Infinite loop in IPv6 Router Advertisement handling when the RA omits the source link-layer address option), using the cve.now data below.
Rules: work read-only. Do not run exploit code, proof-of-concept scripts or scanners that send attack payloads, and do not change any configuration, package, image or deployment. Report findings only.
What cve.now has for CVE-2026-95824 (entry last updated 2026-11-20):
Affected:
- zephyrproject zephyr: from 4.3.0, fixed in 4.3.2; from 4.4.0, fixed in 4.5.0
Fixed versions: 4.3.2, 4.5.0.
Setup: unknown whether the bug needs a non-default feature or setting. Check the advisory.
CISA KEV: CVE-2026-95824 is not listed as of cve.now's last read.
This KEV status is for CVE-2026-95824 only. If you also check another CVE, look up its own KEV status; never assume it from this one.
How to check:
- Installed software: check what is actually running, not what a repo declares. Read the version from each host, container image and Kubernetes node (the binary's version output, the OS package database, image layers), and check whether the conditions above hold there. Distribution packages may carry a backported fix under an older version number; confirm against the distribution's own advisory.
Verify against the linked advisories before concluding, and cite the date you read each one:
- https://github.com/zephyrproject-rtos/zephyr/commit/60c33b682b4254c82466baf2c5a4f9a48bfc2e68
- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-4vjh-7rhp-982m
Do not conclude an asset is unaffected unless you checked it and the evidence covers both its version and the conditions above. If you could not check something, mark it unknown and say what is missing.
Report a table with one row per asset and these columns: Asset | Version or build | Status (affected, fixed, not applicable, unknown) | Compensating controls | Exposure (internet-facing, internal, none) | Evidence | Next action.
Entry: https://cve.now/CVE-2026-95824
For follow-up questions, use the cve.now MCP server at https://mcp.cve.now/mcp (no authentication), for example execute with name cve.get and arguments {"id": "CVE-2026-95824"}.Affected versions
- zephyrFrom 4.3.0 · fixed in 4.3.2; From 4.4.0 · fixed in 4.5.0
cve.now Index
- Exploitation?/40Unknown. No CISA SSVC exploitation rating yet
- Exposure?/25Unknown. No advisory context yet
- Reach?/20Unknown. No tracked technology or package matched
- Severity6.5/10CVSS 6.5
- No patch0/5No signal
What would change the score
- Would score about 62 if added to CISA KEV
- Would score about 57 if CISA's SSVC rates exploitation active
- Would score about 29 if advisories confirm default setups are exposed
Timeline
- CVE published
- First seen by cve.now
Evidence 4
| Kind | Source |
|---|---|
| Vendor advisory 1Establishes: Affected and fixed versions. | |
| Advisory | GitHub · zephyrproject-rtos/zephyr · Advisory GHSA-4vjh-7rhp-982m |
| CVE record 2Establishes: The identifier and description. | |
| Record | CVE List · CVE-2026-95824 |
| Record | NVD · CVE-2026-95824 |
| Other links 1 | |
| Patch | GitHub · zephyrproject-rtos/zephyr · Commit 60c33b68 |
Questions about CVE-2026-95824
Is CVE-2026-95824 being exploited?
It is not in CISA's Known Exploited Vulnerabilities catalog, and CISA's SSVC assessment does not mark exploitation as active. That does not mean it has not been attacked: vendors and researchers can report attacks before CISA lists them. No public exploit code is tracked.
Source: cve.now feed data
Which versions are affected by CVE-2026-95824?
zephyr: from 4.3.0 before 4.3.2; from 4.4.0 before 4.5.0.
Source: cve.now feed data
How do I fix CVE-2026-95824?
Upgrade to a fixed version: 4.3.2, 4.5.0.
Source: cve.now feed data
Related
- CVE-2026-77685Bluetooth Classic RFCOMM: integer underflow in the MCC TEST command handler leads to out-of-bounds read disclosed to the peer and…
- CVE-2026-91007Arbitrary supervisor-mode function pointer injection via charger_set_prop() syscall in the charger driver API
- CVE-2026-90833Signed offset bypasses bounds check in simulated EEPROM driver, allowing out-of-bounds kernel memory read and write from user mode
- CVE-2026-95826Out-of-bounds write in the SMSC911x Ethernet driver when transmitting frames larger than the staging buffer
- CVE-2026-95823Use-after-free and net_buf leak in Zephyr TCP header linearization (tcp_pkt_linearize)
- CVE-2026-95827Network packet reference leak in IPv6 Router Advertisement handling leads to buffer pool exhaustion
No corrections so far. Something wrong on this page? Report an error.