Skip to main content
Menu
CVEs

CVE

Zephyr memory corruption in DesignWare I3C driver

CVE-2026-93670EUVD-2026-126668

CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:L

3.5LowCNA
Exploited
No known exploitation
Fix
Fixed in 4.3.2, 4.5.0
Who is exposed
Not reported

Do first: Upgrade to a fixed version: 4.3.2, 4.5.0.

Published
Last modified
Reference
Last checked
4/100 · provisional
None on Exploit-DB, Metasploit or GitHub

Summary

In Zephyr, the DesignWare I3C driver can write past the end of its device address table when that table is full, because the full-table check never fires. An attacker with physical access can trigger this without logging in or any user action, corrupting memory and possibly disrupting the device.

Written by anthropic/claude-haiku-5.5 from the sources below. Verify against them.

Original description

The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build.

With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound.

The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands.

Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.

cve.now Index

4Pcve.now Index 4 of 100 · methodology v3 · provisional
  • Exploitation?/40Unknown. No CISA SSVC exploitation rating yet
  • Exposure?/25Unknown. No advisory context yet
  • Reach?/20Unknown. No tracked technology or package matched
  • Severity3.5/10CVSS 3.5
  • No patch0/5No signal

What would change the score

  • Would score about 59 if added to CISA KEV
  • Would score about 54 if CISA's SSVC rates exploitation active
  • Would score about 26 if advisories confirm default setups are exposed

What to do

  • Upgrade to a fixed version: 4.3.2, 4.5.0.

Check your systems with an agent

Paste this into a coding or ops agent. It checks your systems read-only and reports a table per asset.

Check whether my systems are affected by CVE-2026-93670 (Out-of-bounds write in the DesignWare I3C driver when the device address table is full), using the cve.now data below.

Rules: work read-only. Do not run exploit code, proof-of-concept scripts or scanners that send attack payloads, and do not change any configuration, package, image or deployment. Report findings only.

What cve.now has for CVE-2026-93670 (entry last updated 2026-11-16):
Affected:
- zephyrproject zephyr: from 4.1.0, fixed in 4.3.2; from 4.4.0, fixed in 4.5.0
Fixed versions: 4.3.2, 4.5.0.
Setup: unknown whether the bug needs a non-default feature or setting. Check the advisory.
CISA KEV: CVE-2026-93670 is not listed as of cve.now's last read.
This KEV status is for CVE-2026-93670 only. If you also check another CVE, look up its own KEV status; never assume it from this one.

How to check:
- Installed software: check what is actually running, not what a repo declares. Read the version from each host, container image and Kubernetes node (the binary's version output, the OS package database, image layers), and check whether the conditions above hold there. Distribution packages may carry a backported fix under an older version number; confirm against the distribution's own advisory.

Verify against the linked advisories before concluding, and cite the date you read each one:
- https://github.com/zephyrproject-rtos/zephyr/commit/1df24c85842da26b24c14b7cfcd51928a86b5530
- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-5jhj-95j8-x5gf
Do not conclude an asset is unaffected unless you checked it and the evidence covers both its version and the conditions above. If you could not check something, mark it unknown and say what is missing.

Report a table with one row per asset and these columns: Asset | Version or build | Status (affected, fixed, not applicable, unknown) | Compensating controls | Exposure (internet-facing, internal, none) | Evidence | Next action.

Entry: https://cve.now/CVE-2026-93670
For follow-up questions, use the cve.now MCP server at https://mcp.cve.now/mcp (no authentication), for example execute with name cve.get and arguments {"id": "CVE-2026-93670"}.

Timeline

  1. CVE published
  2. First seen by cve.now

Affected versions

  • zephyr

    From 4.1.0 · fixed in 4.3.2; From 4.4.0 · fixed in 4.5.0

Evidence 4

Vendor advisory · 1

Establishes: Affected and fixed versions.

  1. Advisory

CVE record · 2

Establishes: The identifier and description.

  1. Record
  2. Record

Other links · 1

  1. Patch

Corrections

None so far.

Something wrong on this page? Report an error. Every fix is listed here.

Questions about CVE-2026-93670

Is CVE-2026-93670 being exploited?

It is not in CISA's Known Exploited Vulnerabilities catalog, and CISA's SSVC assessment does not mark exploitation as active. That does not mean it has not been attacked: vendors and researchers can report attacks before CISA lists them. No public exploit code is tracked.Source: cve.now feed data

Which versions are affected by CVE-2026-93670?

zephyr: from 4.1.0 before 4.3.2; from 4.4.0 before 4.5.0.Source: cve.now feed data

How do I fix CVE-2026-93670?

Upgrade to a fixed version: 4.3.2, 4.5.0.Source: cve.now feed data