CVE
Zephyr denial of service in SHI host-command backend
CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
- Exploited
- No known exploitation
- Fix
- Fixed in 4.3.2, 4.5.0
- Who is exposed
- Not reported
Do first: Upgrade to a fixed version: 4.3.2, 4.5.0.
- Last modified
- Whether it needs action now or is a reference record, by fixed rules, with why. Last checked is when cve.now last re-read it.What do these mean? →
- Reference
- Last checked
- A 0-100 score for how much a CVE matters across the industry: exploitation, exposure, how widely the software is used, severity and whether a fix exists.What do these mean? →
- 5/100 · provisional
- Whether working attack code is public (Exploit-DB, Metasploit, Nuclei or GitHub). Public code makes attacks easier.What do these mean? →
- None on Exploit-DB, Metasploit or GitHub
Summary
The Zephyr software's ITE IT8xxx2 SHI host-command backend can dereference a NULL pointer when a host processor's SPI transaction arrives before the backend finishes initializing. A local attacker with low privileges can use this to crash the embedded controller's kernel, halting it until a hardware reset and denying service.
Written by anthropic/claude-haiku-5.5 from the sources below. Verify against them.
Original description
The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).
If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.
The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.
The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm.
cve.now Index
- Exploitation?/40Unknown. No CISA SSVC exploitation rating yet
- Exposure?/25Unknown. No advisory context yet
- Reach?/20Unknown. No tracked technology or package matched
- Severity4.7/10CVSS 4.7
- No patch0/5No signal
What would change the score
- Would score about 60 if added to CISA KEV
- Would score about 55 if CISA's SSVC rates exploitation active
- Would score about 27 if advisories confirm default setups are exposed
What to do
Upgrade to a fixed version: 4.3.2, 4.5.0.
Check your systems with an agent
Paste this into a coding or ops agent. It checks your systems read-only and reports a table per asset.
Check whether my systems are affected by CVE-2026-93669 (NULL pointer dereference in the ITE IT8xxx2 SHI host-command backend when a host transaction arrives before backend initialization), using the cve.now data below.
Rules: work read-only. Do not run exploit code, proof-of-concept scripts or scanners that send attack payloads, and do not change any configuration, package, image or deployment. Report findings only.
What cve.now has for CVE-2026-93669 (entry last updated 2026-11-16):
Affected:
- zephyrproject zephyr: from 3.4.0, fixed in 4.3.2; from 4.4.0, fixed in 4.5.0
Fixed versions: 4.3.2, 4.5.0.
Setup: unknown whether the bug needs a non-default feature or setting. Check the advisory.
CISA KEV: CVE-2026-93669 is not listed as of cve.now's last read.
This KEV status is for CVE-2026-93669 only. If you also check another CVE, look up its own KEV status; never assume it from this one.
How to check:
- Installed software: check what is actually running, not what a repo declares. Read the version from each host, container image and Kubernetes node (the binary's version output, the OS package database, image layers), and check whether the conditions above hold there. Distribution packages may carry a backported fix under an older version number; confirm against the distribution's own advisory.
Verify against the linked advisories before concluding, and cite the date you read each one:
- https://github.com/zephyrproject-rtos/zephyr/commit/73c6a4ed9506ca81ddfb9d89197b74425a8ce632
- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-xqxg-8rx7-42hq
Do not conclude an asset is unaffected unless you checked it and the evidence covers both its version and the conditions above. If you could not check something, mark it unknown and say what is missing.
Report a table with one row per asset and these columns: Asset | Version or build | Status (affected, fixed, not applicable, unknown) | Compensating controls | Exposure (internet-facing, internal, none) | Evidence | Next action.
Entry: https://cve.now/CVE-2026-93669
For follow-up questions, use the cve.now MCP server at https://mcp.cve.now/mcp (no authentication), for example execute with name cve.get and arguments {"id": "CVE-2026-93669"}.Timeline
- CVE published
- First seen by cve.now
Affected versions
- zephyr
From 3.4.0 · fixed in 4.3.2; From 4.4.0 · fixed in 4.5.0
Evidence 4
Vendor advisory · 1
Establishes: Affected and fixed versions.
- Advisory
CVE record · 2
Establishes: The identifier and description.
- Record
- Record
Other links · 1
- Patch
Corrections
None so far.
Something wrong on this page? Report an error. Every fix is listed here.
Questions about CVE-2026-93669
Is CVE-2026-93669 being exploited?
It is not in CISA's Known Exploited Vulnerabilities catalog, and CISA's SSVC assessment does not mark exploitation as active. That does not mean it has not been attacked: vendors and researchers can report attacks before CISA lists them. No public exploit code is tracked.Source: cve.now feed data
Which versions are affected by CVE-2026-93669?
zephyr: from 3.4.0 before 4.3.2; from 4.4.0 before 4.5.0.Source: cve.now feed data
How do I fix CVE-2026-93669?
Upgrade to a fixed version: 4.3.2, 4.5.0.Source: cve.now feed data