Skip to main content
Menu
CVEs

CVE

CODESYS Automation Server Connector path traversal in connector allows arbitrary file writes

Only affects CODESYS Automation Server Connector versions from 1.23.0.0 before 1.40.0.0 when scripting commands run through the affected interface. Fixed in 1.40.0.0.

CVE-2026-118498EUVD-2026-126937GHSA-FFMC-JFRX-4XJQ

Written by a model from the sources below. Verify against them.

CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:A/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

7.5HighCNA
Exploited
No known exploitation
Fix
Fixed in 1.40.0.0
Who is exposed
Specific setups only

Do first: Check whether your setup matches what the bug needs. CODESYS Automation Server Connector versions from 1.23.0.0 up to but not including 1.40.0.0 are affected. Successful exploitation requires execution of commands via the affected scripting interface.

Published
Last modified
Reference
Last checked
0.62% · 50th percentile
21/100 · provisional
Specific setups only
None on Exploit-DB, Metasploit or GitHub
  • Exploitation: none
  • Automatable: no
  • Technical impact: total

Summary

The CODESYS Automation Server Connector is affected by a path traversal flaw: it trusts file names supplied by a server without checking them properly. An attacker without logging in can reach it remotely, but a user must first be tricked into trusting a malicious Automation Server or the connection must be intercepted; the attacker can then write files to arbitrary locations on the engineering workstation and potentially run code with that user's privileges.

Original description

The CODESYS Automation Server Connector uses server-supplied file names without sufficient path traversal checks. An unauthenticated remote attacker controlling a malicious Automation Server and tricking a user to trust it, or performing a man-in-the-middle attack on a trusted communication channel, can exploit this vulnerability to write attacker-controlled files to arbitrary locations on the engineering workstation and subsequently achieve arbitrary code execution with user privileges.

Who should check

Engineering teams running the CODESYS Automation Server Connector add-on from 1.23.0.0 up to 1.40.0.0 with the CODESYS Development System

“vers:generic/>=1.23.0.0|<1.40.0.0”

certvde.com

cve.now Index

21Pcve.now Index 21 of 100 · methodology v3 · provisional
  • Exploitation0/40No signal
  • Exposure12/25Specific setups only, reachable over the network without a login
  • Reach?/20Unknown. No tracked technology or package matched
  • Severity8.5/10CVSS 7.5, total technical impact per CISA
  • No patch0/5No signal

What would change the score

  • Would score about 71 if added to CISA KEV
  • Would score about 66 if CISA's SSVC rates exploitation active

What to do

  • Check whether your setup matches what the bug needs.

    CODESYS Automation Server Connector versions from 1.23.0.0 up to but not including 1.40.0.0 are affected. Successful exploitation requires execution of commands via the affected scripting interface.
  • Upgrade to a fixed version: 1.40.0.0.

Check your systems with an agent

Paste this into a coding or ops agent. It checks your systems read-only and reports a table per asset.

Check whether my systems are affected by CVE-2026-118498 (Improper Limitation of a Pathname to a Restricted Directory in CODESYS Automation Server Connector), using the cve.now data below.

Rules: work read-only. Do not run exploit code, proof-of-concept scripts or scanners that send attack payloads, and do not change any configuration, package, image or deployment. Report findings only.

What cve.now has for CVE-2026-118498 (entry last updated 2026-11-17):
Affected:
- CODESYS Automation Server Connector: from 1.23.0.0, fixed in 1.40.0.0
Fixed versions: 1.40.0.0.
Conditions (all must be true for the bug to be hit):
- CODESYS Automation Server Connector versions from 1.23.0.0 up to but not including 1.40.0.0 are affected. (source: https://certvde.com/en/advisories/VDE-2026-146/)
- Successful exploitation requires execution of commands via the affected scripting interface. (source: https://certvde.com/en/advisories/VDE-2026-146/)
Setup: unknown whether the bug needs a non-default feature or setting. Check the advisory.
Attacker needs: network access, no login, a user action.
CISA KEV: CVE-2026-118498 is not listed as of cve.now's last read.
This KEV status is for CVE-2026-118498 only. If you also check another CVE, look up its own KEV status; never assume it from this one.

How to check:
- Installed software: check what is actually running, not what a repo declares. Read the version from each host, container image and Kubernetes node (the binary's version output, the OS package database, image layers), and check whether the conditions above hold there. Distribution packages may carry a backported fix under an older version number; confirm against the distribution's own advisory.

Verify against the linked advisories before concluding, and cite the date you read each one:
- https://www.certvde.com/en/advisories/VDE-2026-146/
- https://certvde.com/en/advisories/VDE-2026-146/
Do not conclude an asset is unaffected unless you checked it and the evidence covers both its version and the conditions above. If you could not check something, mark it unknown and say what is missing.

Report a table with one row per asset and these columns: Asset | Version or build | Status (affected, fixed, not applicable, unknown) | Compensating controls | Exposure (internet-facing, internal, none) | Evidence | Next action.

Entry: https://cve.now/CVE-2026-118498
For follow-up questions, use the cve.now MCP server at https://mcp.cve.now/mcp (no authentication), for example execute with name cve.get and arguments {"id": "CVE-2026-118498"}.

Timeline

  1. CVE published
  2. First seen by cve.now
  3. CISA SSVC assessment

    Exploitation: none · Automatable: no · Technical impact: total

  4. Record last updated

Affected versions

  • CODESYS Automation Server Connector

    From 1.23.0.0 · fixed in 1.40.0.0

Evidence 3

CVE record · 2

Establishes: The identifier and description.

  1. Record
  2. Record

Other links · 1

  1. Link

Corrections

None so far.

Something wrong on this page? Report an error. Every fix is listed here.

Questions about CVE-2026-118498

Is CVE-2026-118498 being exploited?

It is not in CISA's Known Exploited Vulnerabilities catalog, and CISA's SSVC assessment does not mark exploitation as active. That does not mean it has not been attacked: vendors and researchers can report attacks before CISA lists them. No public exploit code is tracked.Source: cve.now feed data

What does this mean?

A flaw in how the product limits file paths lets an attacker write attacker-controlled files to arbitrary locations on the engineering workstation. This may lead to remote code execution with the privileges of the user running the CODESYS Development System.Source: certvde.com

Which versions are affected by CVE-2026-118498?

Automation Server Connector: from 1.23.0.0 before 1.40.0.0.Source: cve.now feed data

Am I affected, and how do I check?

CODESYS Automation Server Connector versions from 1.23.0.0 up to but not including 1.40.0.0 are affected. The exposure requires commands to be executed through the affected scripting interface, so check the installed Automation Server Connector version and whether that scripting interface is in use.Source: certvde.com

How do I fix CVE-2026-118498?

Update CODESYS Automation Server Connector to version 1.40.0.0.Source: certvde.com

More CVEs